NLog.Targets.Stackify - NLog ver. 4.5.0 RTM

Author: strvmarv

Src/NLog.Targets.Stackify/NLog.Targets.Stackify.csproj

@@ -15,7 +15,7 @@
     <GenerateAssemblyCopyrightAttribute>false</GenerateAssemblyCopyrightAttribute>
     <GenerateAssemblyVersionAttribute>false</GenerateAssemblyVersionAttribute>
     <GenerateAssemblyFileVersionAttribute>false</GenerateAssemblyFileVersionAttribute>
-    <Version>2.1.0</Version>
+    <Version>2.1.1</Version>
     <PackageLicenseUrl>https://github.com/stackify/stackify-api-dotnet/blob/master/LICENSE</PackageLicenseUrl>
     <PackageProjectUrl>https://github.com/stackify/stackify-api-dotnet</PackageProjectUrl>
     <PackageIconUrl>https://stackify.com/wp-content/uploads/2017/02/stk.png</PackageIconUrl>

Src/NLog.Targets.Stackify/Properties/AssemblyInfo.cs

@@ -2,7 +2,7 @@
 using System.Runtime.CompilerServices;
 using System.Runtime.InteropServices;
 
-// General Information about an assembly is controlled through the following 
+// General Information about an assembly is controlled through the following
 // set of attributes. Change these attribute values to modify the information
 // associated with an assembly.
 [assembly: AssemblyTitle("NLog.Targets.Stackify")]
@@ -14,8 +14,8 @@
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
 
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components.  If you need to access a type in this assembly from
 // COM, set the ComVisible attribute to true on that type.
 [assembly: ComVisible(false)]
 
@@ -25,12 +25,12 @@
 // Version information for an assembly consists of the following four values:
 //
 //      Major Version
-//      Minor Version 
+//      Minor Version
 //      Build Number
 //      Revision
 //
-// You can specify all the values or you can default the Build and Revision Numbers 
+// You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.18.1.0")]
-[assembly: AssemblyFileVersion("1.18.1.0")]
+[assembly: AssemblyVersion("2.1.1.0")]
+[assembly: AssemblyFileVersion("2.1.1.0")]