problem when booting

[luisdevelop23]

Hello, I have the problem that when I run the gear the screen goes black, I have already disabled HideAuxiliary, and it doesn't work, I also have everything activated with UMAF,
my laptop model is
Ryzen 7 4800hs, 16gb ram(default),m.2 512gb(default), gtx 1650.
Please, some more steps to do, already tried with several versions of macos too

[oceanondawave]

Hello, I have the problem that when I run the gear the screen goes black, I have already disabled HideAuxiliary, and it doesn't work, I also have everything activated with UMAF, my laptop model is Ryzen 7 4800hs, 16gb ram(default),m.2 512gb(default), gtx 1650. Please, some more steps to do, already tried with several versions of macos too

• Have you disabled Fast Boot and Secure Boot in BIOS?
• Have you generated your PI information using OCAuxiliaryTools?

[oceanondawave]

@oceanthedev Add the PI parameters, with the tool you mentioned, I select the (dmg) when I'm in boot mode, the apple logo comes out, after a few seconds the loading bar, but then the screen goes black, do you have any more tips???

Maybe you can attach your EFI folder here so I may take a look at it. That can be caused by several reasons, and it's hard to know exactly just via the problem you give me.

I would appreciate it very much, literally I just want to install macos for university reasons. I attach my EFI with my information
CPU: AMD RYZEN 7 4800HS WITH RADEON GRAPHICS
GPU: NVIDIA GTX 1650 - AMD REDEON VEGA 8
NETWORK CARD: INTEL(R) WIFI 6 AX200 160MHZ
SSD: INTEL SSDPEKNU512GZ
RAM: 16GB
I'll still leave you my WhatsApp: +51904209478
my efi
https://github.com/luisdevelop23/EFI-ASUS-ROG14-2020

That's good, I managed to get to the installations part, I managed to connect to wifi, but according to the load bar I'm done but it doesn't move from there, what could I do?

I already installed on my disk, and now I get this new section on my efi, I select it after a moment it restarts, according to the disk information I already manage to install 10gb that the partition I made, here I don't know what else to do

Seems like you've managed to install macOS successfully. Just hit macOS Installer and finish the process, if it restarts and shows the boot menu, just hit it and wait.

[luisdevelop23]

@oceanthedev Add the PI parameters, with the tool you mentioned, I select the (dmg) when I'm in boot mode, the apple logo comes out, after a few seconds the loading bar, but then the screen goes black, do you have any more tips???

Maybe you can attach your EFI folder here so I may take a look at it. That can be caused by several reasons, and it's hard to know exactly just via the problem you give me.

I would appreciate it very much, literally I just want to install macos for university reasons. I attach my EFI with my information

CPU: AMD RYZEN 7 4800HS WITH RADEON GRAPHICS

GPU: NVIDIA GTX 1650 - AMD REDEON VEGA 8

NETWORK CARD: INTEL(R) WIFI 6 AX200 160MHZ

SSD: INTEL SSDPEKNU512GZ

RAM: 16GB

I'll still leave you my WhatsApp: +51904209478

my efi

https://github.com/luisdevelop23/EFI-ASUS-ROG14-2020

That's good, I managed to get to the installations part, I managed to connect to wifi, but according to the load bar I'm done but it doesn't move from there, what could I do?

I already installed on my disk, and now I get this new section on my efi, I select it after a moment it restarts, according to the disk information I already manage to install 10gb that the partition I made, here I don't know what else to do

Seems like you've managed to install macOS successfully. Just hit macOS Installer and finish the process, if it restarts and shows the boot menu, just hit it and wait.

I try to install but every time I press to install macos it restarts, it's already more than 20 times

[luisdevelop23]

@oceanthedev Add the PI parameters, with the tool you mentioned, I select the (dmg) when I'm in boot mode, the apple logo comes out, after a few seconds the loading bar, but then the screen goes black, do you have any more tips???

Maybe you can attach your EFI folder here so I may take a look at it. That can be caused by several reasons, and it's hard to know exactly just via the problem you give me.

I would appreciate it very much, literally I just want to install macos for university reasons. I attach my EFI with my information

CPU: AMD RYZEN 7 4800HS WITH RADEON GRAPHICS

GPU: NVIDIA GTX 1650 - AMD REDEON VEGA 8

NETWORK CARD: INTEL(R) WIFI 6 AX200 160MHZ

SSD: INTEL SSDPEKNU512GZ

RAM: 16GB

I'll still leave you my WhatsApp: +51904209478

my efi

https://github.com/luisdevelop23/EFI-ASUS-ROG14-2020

That's good, I managed to get to the installations part, I managed to connect to wifi, but according to the load bar I'm done but it doesn't move from there, what could I do?

I already installed on my disk, and now I get this new section on my efi, I select it after a moment it restarts, according to the disk information I already manage to install 10gb that the partition I made, here I don't know what else to do

Seems like you've managed to install macOS successfully. Just hit macOS Installer and finish the process, if it restarts and shows the boot menu, just hit it and wait.

I try to install but every time I press to install macos it restarts, it's already more than 20 times

I managed to install macos, now it works but when I restart or turn it off I have to use my USB to access the macos system, any advice? I guess I have to install a new boot system

[luisdevelop23]

@oceanthedev Add the PI parameters, with the tool you mentioned, I select the (dmg) when I'm in boot mode, the apple logo comes out, after a few seconds the loading bar, but then the screen goes black, do you have any more tips???

Maybe you can attach your EFI folder here so I may take a look at it. That can be caused by several reasons, and it's hard to know exactly just via the problem you give me.

I would appreciate it very much, literally I just want to install macos for university reasons. I attach my EFI with my information

CPU: AMD RYZEN 7 4800HS WITH RADEON GRAPHICS

GPU: NVIDIA GTX 1650 - AMD REDEON VEGA 8

NETWORK CARD: INTEL(R) WIFI 6 AX200 160MHZ

SSD: INTEL SSDPEKNU512GZ

RAM: 16GB

I'll still leave you my WhatsApp: +51904209478

my efi

https://github.com/luisdevelop23/EFI-ASUS-ROG14-2020

That's good, I managed to get to the installations part, I managed to connect to wifi, but according to the load bar I'm done but it doesn't move from there, what could I do?

I already installed on my disk, and now I get this new section on my efi, I select it after a moment it restarts, according to the disk information I already manage to install 10gb that the partition I made, here I don't know what else to do

Seems like you've managed to install macOS successfully. Just hit macOS Installer and finish the process, if it restarts and shows the boot menu, just hit it and wait.

I try to install but every time I press to install macos it restarts, it's already more than 20 times

I managed to install macos, now it works but when I restart or turn it off I have to use my USB to access the macos system, any advice? I guess I have to install a new boot system

I did it, thank you very much for the tips,

[oceanondawave]

@oceanthedev Add the PI parameters, with the tool you mentioned, I select the (dmg) when I'm in boot mode, the apple logo comes out, after a few seconds the loading bar, but then the screen goes black, do you have any more tips???

Maybe you can attach your EFI folder here so I may take a look at it. That can be caused by several reasons, and it's hard to know exactly just via the problem you give me.

I would appreciate it very much, literally I just want to install macos for university reasons. I attach my EFI with my information

CPU: AMD RYZEN 7 4800HS WITH RADEON GRAPHICS

GPU: NVIDIA GTX 1650 - AMD REDEON VEGA 8

NETWORK CARD: INTEL(R) WIFI 6 AX200 160MHZ

SSD: INTEL SSDPEKNU512GZ

RAM: 16GB

I'll still leave you my WhatsApp: +51904209478

my efi

https://github.com/luisdevelop23/EFI-ASUS-ROG14-2020

That's good, I managed to get to the installations part, I managed to connect to wifi, but according to the load bar I'm done but it doesn't move from there, what could I do?

I already installed on my disk, and now I get this new section on my efi, I select it after a moment it restarts, according to the disk information I already manage to install 10gb that the partition I made, here I don't know what else to do

Seems like you've managed to install macOS successfully. Just hit macOS Installer and finish the process, if it restarts and shows the boot menu, just hit it and wait.

I try to install but every time I press to install macos it restarts, it's already more than 20 times

I managed to install macos, now it works but when I restart or turn it off I have to use my USB to access the macos system, any advice? I guess I have to install a new boot system

I did it, thank you very much for the tips,

Yes, after using your USB to boot into macOS, use OCAuxiliary (please go to the repo to download the .dmg file and install it first) > go to Edit > Mount ESP > Mount your EFI partition. Go to your USB > EFI > copy the OC folder then paste it into the EFI partition that you have just mounted it using OCAuxiliary. You can dual boot Windows with macOS too if you still have Windows installed, just google for the tutorials, but for now, it's good to boot without the USB. Restart, go to BIOS, create a boot option pointing to the file BOOTx64.efi (it's in EFI or somewhere, I don't remember, just search for it). Now you're good to go.