Skip to content

Sync to v5.13 #399

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 659 commits into from
Jun 29, 2021
Merged

Sync to v5.13 #399

merged 659 commits into from
Jun 29, 2021

Conversation

ojeda
Copy link
Member

@ojeda ojeda commented Jun 29, 2021

Let's get rid of some differences before the next big -rc1.

Peter Chen and others added 30 commits June 15, 2021 12:20
When do system reboot, it calls dwc3_shutdown and the whole debugfs
for dwc3 has removed first, when the gadget tries to do deinit, and
remove debugfs for its endpoints, it meets NULL pointer dereference
issue when call debugfs_lookup. Fix it by removing the whole dwc3
debugfs later than dwc3_drd_exit.

[ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002
....
[ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 2925.037005] pc : inode_permission+0x2c/0x198
[ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8
[ 2925.045903] sp : ffff80001276ba70
[ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000
[ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100
[ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001
[ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000
[ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004
[ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030
[ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420
[ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080
[ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065
[ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188
[ 2925.120671] Call trace:
[ 2925.123119]  inode_permission+0x2c/0x198
[ 2925.127042]  lookup_one_len_common+0xb0/0xf8
[ 2925.131315]  lookup_one_len_unlocked+0x34/0xb0
[ 2925.135764]  lookup_positive_unlocked+0x14/0x50
[ 2925.140296]  debugfs_lookup+0x68/0xa0
[ 2925.143964]  dwc3_gadget_free_endpoints+0x84/0xb0
[ 2925.148675]  dwc3_gadget_exit+0x28/0x78
[ 2925.152518]  dwc3_drd_exit+0x100/0x1f8
[ 2925.156267]  dwc3_remove+0x11c/0x120
[ 2925.159851]  dwc3_shutdown+0x14/0x20
[ 2925.163432]  platform_shutdown+0x28/0x38
[ 2925.167360]  device_shutdown+0x15c/0x378
[ 2925.171291]  kernel_restart_prepare+0x3c/0x48
[ 2925.175650]  kernel_restart+0x1c/0x68
[ 2925.179316]  __do_sys_reboot+0x218/0x240
[ 2925.183247]  __arm64_sys_reboot+0x28/0x30
[ 2925.187262]  invoke_syscall+0x48/0x100
[ 2925.191017]  el0_svc_common.constprop.0+0x48/0xc8
[ 2925.195726]  do_el0_svc+0x28/0x88
[ 2925.199045]  el0_svc+0x20/0x30
[ 2925.202104]  el0_sync_handler+0xa8/0xb0
[ 2925.205942]  el0_sync+0x148/0x180
[ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660)
[ 2925.215372] ---[ end trace 124254d8e485a58b ]---
[ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2925.227676] Kernel Offset: disabled
[ 2925.231164] CPU features: 0x00001001,20000846
[ 2925.235521] Memory Limit: none
[ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Fixes: 8d396bb ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: Jack Pham <jackp@codeaurora.org>
Tested-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210608105656.10795-1-peter.chen@kernel.org
(cherry picked from commit 2a04276)
Link: https://lore.kernel.org/r/20210615080847.GA10432@jackp-linux.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b0b3b2c ("powerpc: Switch to relative jump labels") switched
us to using relative jump labels. That involves changing the code,
target and key members in struct jump_entry to be relative to the
address of the jump_entry, rather than absolute addresses.

We have two static inlines that create a struct jump_entry,
arch_static_branch() and arch_static_branch_jump(), as well as an asm
macro ARCH_STATIC_BRANCH, which is used by the pseries-only hypervisor
tracing code.

Unfortunately we missed updating the key to be a relative reference in
ARCH_STATIC_BRANCH.

That causes a pseries kernel to have a handful of jump_entry structs
with bad key values. Instead of being a relative reference they instead
hold the full address of the key.

However the code doesn't expect that, it still adds the key value to the
address of the jump_entry (see jump_entry_key()) expecting to get a
pointer to a key somewhere in kernel data.

The table of jump_entry structs sits in rodata, which comes after the
kernel text. In a typical build this will be somewhere around 15MB. The
address of the key will be somewhere in data, typically around 20MB.
Adding the two values together gets us a pointer somewhere around 45MB.

We then call static_key_set_entries() with that bad pointer and modify
some members of the struct static_key we think we are pointing at.

A pseries kernel is typically ~30MB in size, so writing to ~45MB won't
corrupt the kernel itself. However if we're booting with an initrd,
depending on the size and exact location of the initrd, we can corrupt
the initrd. Depending on how exactly we corrupt the initrd it can either
cause the system to not boot, or just corrupt one of the files in the
initrd.

The fix is simply to make the key value relative to the jump_entry
struct in the ARCH_STATIC_BRANCH macro.

Fixes: b0b3b2c ("powerpc: Switch to relative jump labels")
Reported-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Reported-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reported-by: Greg Kurz <groug@kaod.org>
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210614131440.312360-1-mpe@ellerman.id.au
The proc_symlink() function returns NULL on error, it doesn't return
error pointers.

Fixes: 5b86d4f ("afs: Implement network namespacing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLjMRKX40pTrJvgf@mwanda/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xa_destroy() needs to be called to destroy a virtual EPC's page array
before calling kfree() to free the virtual EPC. Currently it is not
called so add the missing xa_destroy().

Fixes: 540745d ("x86/sgx: Introduce virtual EPC for use by KVM guests")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Yang Zhong <yang.zhong@intel.com>
Link: https://lkml.kernel.org/r/20210615101639.291929-1-kai.huang@intel.com
Commit 591a22c ("proc: Track /proc/$pid/attr/ opener mm_struct") we
started using __mem_open() to track the mm_struct at open-time, so that
we could then check it for writes.

But that also ended up making the permission checks at open time much
stricter - and not just for writes, but for reads too.  And that in turn
caused a regression for at least Fedora 29, where NIC interfaces fail to
start when using NetworkManager.

Since only the write side wanted the mm_struct test, ignore any failures
by __mem_open() at open time, leaving reads unaffected.  The write()
time verification of the mm_struct pointer will then catch the failure
case because a NULL pointer will not match a valid 'current->mm'.

Link: https://lore.kernel.org/netdev/YMjTlp2FSJYvoyFa@unreal/
Fixes: 591a22c ("proc: Track /proc/$pid/attr/ opener mm_struct")
Reported-and-tested-by: Leon Romanovsky <leon@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Scaled PPM conversion to PPB may (on 64bit systems) result
in a value larger than s32 can hold (freq/scaled_ppm is a long).
This means the kernel will not correctly reject unreasonably
high ->freq values (e.g. > 4294967295ppb, 281474976645 scaled PPM).

The conversion is equivalent to a division by ~66 (65.536),
so the value of ppb is always smaller than ppm, but not small
enough to assume narrowing the type from long -> s32 is okay.

Note that reasonable user space (e.g. ptp4l) will not use such
high values, anyway, 4289046510ppb ~= 4.3x, so the fix is
somewhat pedantic.

Fixes: d39a743 ("ptp: validate the requested frequency adjustment.")
Fixes: d94ba80 ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function get_net_ns_by_fd() could be inlined when NET_NS is not
enabled.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is meant to make the host side cdc_ncm interface consistently
named just like the older CDC protocols: cdc_ether & cdc_ecm
(and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'.

include/linux/usb/usbnet.h:
  #define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
  #define FLAG_WLAN	0x0080		/* use "wlan%d" names */
  #define FLAG_WWAN	0x0400		/* use "wwan%d" names */
  #define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */

drivers/net/usb/usbnet.c @ line 1711:
  strcpy (net->name, "usb%d");
  ...
  // heuristic:  "usb%d" for links we know are two-host,
  // else "eth%d" when there's reasonable doubt.  userspace
  // can rename the link if it knows better.
  if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
      ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
       (net->dev_addr [0] & 0x02) == 0))
          strcpy (net->name, "eth%d");
  /* WLAN devices should always be named "wlan%d" */
  if ((dev->driver_info->flags & FLAG_WLAN) != 0)
          strcpy(net->name, "wlan%d");
  /* WWAN devices should always be named "wwan%d" */
  if ((dev->driver_info->flags & FLAG_WWAN) != 0)
          strcpy(net->name, "wwan%d");

So by using ETHER | POINTTOPOINT the interface naming is
either usb%d or eth%d based on the global uniqueness of the
mac address of the device.

Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm
driver end up being called usb%d instead of eth%d even though they're
definitely not two-host.  (All 1gbps & 5gbps ethernet usb dongles I've
tested don't hit this problem due to use of different drivers, primarily
r8152 and aqc111)

Fixes tag is based purely on git blame, and is really just here to make
sure this hits LTS branches newer than v4.5.

Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 4d06dd5 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the QMI_WWAN_FLAG_PASS_THROUGH is set, netif_rx() is called from
qmi_wwan_rx_fixup(). When the call to netif_rx() is successful (which is
most of the time), usbnet_skb_return() is called (from rx_process()).
usbnet_skb_return() will then call netif_rx() a second time for the same
skb.

Simplify the code and avoid the redundant netif_rx() call by changing
qmi_wwan_rx_fixup() to always return 1 when QMI_WWAN_FLAG_PASS_THROUGH
is set. We then leave it up to the existing infrastructure to call
netif_rx().

Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit didn't fix the bug properly. By mistake, it replaces
the pointer of the next skb in the descriptor ring instead of the current
one. As a result, the two descriptors are assigned the same SKB. The error
is seen during the iperf test when skb_put tries to insert a second packet
and exceeds the available buffer.

Fixes: c7718ee ("net: lantiq: fix memory corruption in RX ring ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:

====================
pull-request: bpf 2021-06-15

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 11 day(s) which contain
a total of 10 files changed, 115 insertions(+), 16 deletions(-).

The main changes are:

1) Fix marking incorrect umem ring as done in libbpf's
   xsk_socket__create_shared() helper, from Kev Jackson.

2) Fix oob leakage under a spectre v1 type confusion
   attack, from Daniel Borkmann.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not
following CDP timing requirements defined by USB BC 1.2 specification
and section 3.2.4 Detection Timing CDP.

During Primary Detection the i.MX device should turn on VDP_SRC and
IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON,
the i.MX is allowed to check the status of the D- line. Current
implementation is waiting between 1ms and 2ms, and certain BC 1.2
complaint USB HUBs cannot be detected. Increase delay to 40ms allowing
enough time for primary detection.

During secondary detection the i.MX is required to disable VDP_SRC and
IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON).

Current implementation is not disabling VDP_SRC and IDM_SNK, introduce
disable sequence in imx7d_charger_secondary_detection() function.

VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON).
Increase delay allowing enough time for detection.

Cc: <stable@vger.kernel.org>
Fixes: 746f316 ("usb: chipidea: introduce imx7d USB charger detection")
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
…l/git/peter.chen/usb into usb-linus

Peter writes:

One bug fix for USB charger detection at imx7d and imx8m series SoCs

* tag 'usb-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection
Commit 28e1745 ("printk: rename vprintk_func to vprintk") while
improving readability by removing vprintk indirection, inadvertently
placed the EXPORT_SYMBOL() for the newly renamed function at the end
of the file.

For reader sanity, and as is convention move the EXPORT_SYMBOL()
declaration just after the end of the function.

Fixes: 28e1745 ("printk: rename vprintk_func to vprintk")
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210614235635.887365-1-punitagrawal@gmail.com
This patch fixes a Use-after-Free found by the syzbot.

The problem is that a skb is taken from the per-session skb queue,
without incrementing the ref count. This leads to a Use-after-Free if
the skb is taken concurrently from the session queue due to a CTS.

Fixes: 9d71dd0 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/20210521115720.7533-1-o.rempel@pengutronix.de
Cc: Hillf Danton <hdanton@sina.com>
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot+220c1a29987a9a490903@syzkaller.appspotmail.com
Reported-by: syzbot+45199c1b73b4013525cf@syzkaller.appspotmail.com
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
syzbot is reporting hung task at register_netdevice_notifier() [1] and
unregister_netdevice_notifier() [2], for cleanup_net() might perform
time consuming operations while CAN driver's raw/bcm/isotp modules are
calling {register,unregister}_netdevice_notifier() on each socket.

Change raw/bcm/isotp modules to call register_netdevice_notifier() from
module's __init function and call unregister_netdevice_notifier() from
module's __exit function, as with gw/j1939 modules are doing.

Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1]
Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2]
Link: https://lore.kernel.org/r/54a5f451-05ed-f977-8534-79e7aa2bcc8f@i-love.sakura.ne.jp
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+0f1827363a305f74996f@syzkaller.appspotmail.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: syzbot <syzbot+355f8edb2ff45d5f95fa@syzkaller.appspotmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between
struct members count and ival1. Even though all struct members are initialized,
the 4-byte hole will contain data from the kernel stack. This patch zeroes out
struct bcm_msg_head before usage, preventing infoleaks to userspace.

Fixes: ffd980f ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS
Analyzer Tool. The problem was in unfreed usb_coherent.

In mcba_usb_start() 20 coherent buffers are allocated and there is
nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see mcba_usb_start) and this flag cannot be used with
   coherent buffers.

Fail log:
| [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected
| [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem)

So, all allocated buffers should be freed with usb_free_coherent()
explicitly

NOTE:
The same pattern for allocating and freeing coherent buffers
is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

Fixes: 51f3baa ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.

Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.

Fixes: 4f6e3d6 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-3-maxime@cerno.tech
If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.

Fixes: 4f6e3d6 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-4-maxime@cerno.tech
…linux/kernel/git/kees/linux

Pull clang LTO fix from Kees Cook:
 "It seems Clang has been scrubbing through the missing LTO IR flags for
  Clang 13, and the last of these 'only with LTO' flags is fixed now.

  I've asked that they please consider making these changes in a less
  'break all the Clang kernel builds' kind of way in the future. :P

  Summary:

   - The '-warn-stack-size' option under LTO has moved in Clang 13 (Tor
     Vic)"

* tag 'clang-features-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  Makefile: lto: Pass -warn-stack-size only on LLD < 13.0.0
…kernel/git/vkoul/dmaengine

Pull dmaengine fixes from Vinod Koul:
 "A bunch of driver fixes, notably:

   - More idxd fixes for driver unregister, error handling and bus
     assignment

   - HAS_IOMEM depends fix for few drivers

   - lock fix in pl330 driver

   - xilinx drivers fixes for initialize registers, missing dependencies
     and limiting descriptor IDs

   - mediatek descriptor management fixes"

* tag 'dmaengine-fix-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: mediatek: use GFP_NOWAIT instead of GFP_ATOMIC in prep_dma
  dmaengine: mediatek: do not issue a new desc if one is still current
  dmaengine: mediatek: free the proper desc in desc_free handler
  dmaengine: ipu: fix doc warning in ipu_irq.c
  dmaengine: rcar-dmac: Fix PM reference leak in rcar_dmac_probe()
  dmaengine: idxd: Fix missing error code in idxd_cdev_open()
  dmaengine: stedma40: add missing iounmap() on error in d40_probe()
  dmaengine: SF_PDMA depends on HAS_IOMEM
  dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM
  dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM
  dmaengine: idxd: Add missing cleanup for early error out in probe call
  dmaengine: xilinx: dpdma: Limit descriptor IDs to 16 bits
  dmaengine: xilinx: dpdma: Add missing dependencies to Kconfig
  dmaengine: stm32-mdma: fix PM reference leak in stm32_mdma_alloc_chan_resourc()
  dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc()
  dmaengine: xilinx: dpdma: initialize registers before request_irq
  dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc
  dmaengine: fsl-dpaa2-qdma: Fix error return code in two functions
  dmaengine: idxd: add missing dsa driver unregister
  dmaengine: idxd: add engine 'struct device' missing bus type assignment
When hugetlb page fault (under overcommitting situation) and
memory_failure() race, VM_BUG_ON_PAGE() is triggered by the following
race:

    CPU0:                           CPU1:

                                    gather_surplus_pages()
                                      page = alloc_surplus_huge_page()
    memory_failure_hugetlb()
      get_hwpoison_page(page)
        __get_hwpoison_page(page)
          get_page_unless_zero(page)
                                      zero = put_page_testzero(page)
                                      VM_BUG_ON_PAGE(!zero, page)
                                      enqueue_huge_page(h, page)
      put_page(page)

__get_hwpoison_page() only checks the page refcount before taking an
additional one for memory error handling, which is not enough because
there's a time window where compound pages have non-zero refcount during
hugetlb page initialization.

So make __get_hwpoison_page() check page status a bit more for hugetlb
pages with get_hwpoison_huge_page().  Checking hugetlb-specific flags
under hugetlb_lock makes sure that the hugetlb page is not transitive.
It's notable that another new function, HWPoisonHandlable(), is helpful
to prevent a race against other transitive page states (like a generic
compound page just before PageHuge becomes true).

Link: https://lkml.kernel.org/r/20210603233632.2964832-2-nao.horiguchi@gmail.com
Fixes: ead07f6 ("mm/memory-failure: introduce get_hwpoison_page() for consistent refcount handling")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>	[5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I found it by pure code review, that pte_same_as_swp() of unuse_vma()
didn't take uffd-wp bit into account when comparing ptes.
pte_same_as_swp() returning false negative could cause failure to
swapoff swap ptes that was wr-protected by userfaultfd.

Link: https://lkml.kernel.org/r/20210603180546.9083-1-peterx@redhat.com
Fixes: f45ec5f ("userfaultfd: wp: support swap and page migration")
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>	[5.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Actually fix freelist pointer vs redzoning", v4.

This fixes redzoning vs the freelist pointer (both for middle-position
and very small caches).  Both are "theoretical" fixes, in that I see no
evidence of such small-sized caches actually be used in the kernel, but
that's no reason to let the bugs continue to exist, especially since
people doing local development keep tripping over it.  :)

This patch (of 3):

Instead of repeating "Redzone" and "Poison", clarify which sides of
those zones got tripped.  Additionally fix column alignment in the
trailer.

Before:

  BUG test (Tainted: G    B            ): Redzone overwritten
  ...
  Redzone (____ptrval____): bb bb bb bb bb bb bb bb      ........
  Object (____ptrval____): f6 f4 a5 40 1d e8            ...@..
  Redzone (____ptrval____): 1a aa                        ..
  Padding (____ptrval____): 00 00 00 00 00 00 00 00      ........

After:

  BUG test (Tainted: G    B            ): Right Redzone overwritten
  ...
  Redzone  (____ptrval____): bb bb bb bb bb bb bb bb      ........
  Object   (____ptrval____): f6 f4 a5 40 1d e8            ...@..
  Redzone  (____ptrval____): 1a aa                        ..
  Padding  (____ptrval____): 00 00 00 00 00 00 00 00      ........

The earlier commits that slowly resulted in the "Before" reporting were:

  d86bd1b ("mm/slub: support left redzone")
  ffc79d2 ("slub: use print_hex_dump")
  2492268 ("SLUB: change error reporting format to follow lockdep loosely")

Link: https://lkml.kernel.org/r/20210608183955.280836-1-keescook@chromium.org
Link: https://lkml.kernel.org/r/20210608183955.280836-2-keescook@chromium.org
Link: https://lore.kernel.org/lkml/cfdb11d7-fb8e-e578-c939-f7f5fb69a6bd@suse.cz/
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Marco Elver <elver@google.com>
Cc: "Lin, Zhenpeng" <zplin@psu.edu>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The redzone area for SLUB exists between s->object_size and s->inuse
(which is at least the word-aligned object_size).  If a cache were
created with an object_size smaller than sizeof(void *), the in-object
stored freelist pointer would overwrite the redzone (e.g.  with boot
param "slub_debug=ZF"):

  BUG test (Tainted: G    B            ): Right Redzone overwritten
  -----------------------------------------------------------------------------

  INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb
  INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200
  INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620

  Redzone  (____ptrval____): bb bb bb bb bb bb bb bb    ........
  Object   (____ptrval____): f6 f4 a5 40 1d e8          ...@..
  Redzone  (____ptrval____): 1a aa                      ..
  Padding  (____ptrval____): 00 00 00 00 00 00 00 00    ........

Store the freelist pointer out of line when object_size is smaller than
sizeof(void *) and redzoning is enabled.

Additionally remove the "smaller than sizeof(void *)" check under
CONFIG_DEBUG_VM in kmem_cache_sanity_check() as it is now redundant:
SLAB and SLOB both handle small sizes.

(Note that no caches within this size range are known to exist in the
kernel currently.)

Link: https://lkml.kernel.org/r/20210608183955.280836-3-keescook@chromium.org
Fixes: 81819f0 ("SLUB core")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Lin, Zhenpeng" <zplin@psu.edu>
Cc: Marco Elver <elver@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that SLUB redzoning ("slub_debug=Z") checks from
s->object_size rather than from s->inuse (which is normally bumped to
make room for the freelist pointer), so a cache created with an object
size less than 24 would have the freelist pointer written beyond
s->object_size, causing the redzone to be corrupted by the freelist
pointer.  This was very visible with "slub_debug=ZF":

  BUG test (Tainted: G    B            ): Right Redzone overwritten
  -----------------------------------------------------------------------------

  INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb
  INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200
  INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620

  Redzone  (____ptrval____): bb bb bb bb bb bb bb bb               ........
  Object   (____ptrval____): 00 00 00 00 00 f6 f4 a5               ........
  Redzone  (____ptrval____): 40 1d e8 1a aa                        @....
  Padding  (____ptrval____): 00 00 00 00 00 00 00 00               ........

Adjust the offset to stay within s->object_size.

(Note that no caches of in this size range are known to exist in the
kernel currently.)

Link: https://lkml.kernel.org/r/20210608183955.280836-4-keescook@chromium.org
Link: https://lore.kernel.org/linux-mm/20200807160627.GA1420741@elver.google.com/
Link: https://lore.kernel.org/lkml/0f7dd7b2-7496-5e2d-9488-2ec9f8e90441@suse.cz/Fixes: 89b83f2 (slub: avoid redzone when choosing freepointer location)
Link: https://lore.kernel.org/lkml/CANpmjNOwZ5VpKQn+SYWovTkFB4VsT-RPwyENBmaK0dLcpqStkA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Marco Elver <elver@google.com>
Reported-by: "Lin, Zhenpeng" <zplin@psu.edu>
Tested-by: Marco Elver <elver@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The routine restore_reserve_on_error is called to restore reservation
information when an error occurs after page allocation.  The routine
alloc_huge_page modifies the mapping reserve map and potentially the
reserve count during allocation.  If code calling alloc_huge_page
encounters an error after allocation and needs to free the page, the
reservation information needs to be adjusted.

Currently, restore_reserve_on_error only takes action on pages for which
the reserve count was adjusted(HPageRestoreReserve flag).  There is
nothing wrong with these adjustments.  However, alloc_huge_page ALWAYS
modifies the reserve map during allocation even if the reserve count is
not adjusted.  This can cause issues as observed during development of
this patch [1].

One specific series of operations causing an issue is:

 - Create a shared hugetlb mapping
   Reservations for all pages created by default

 - Fault in a page in the mapping
   Reservation exists so reservation count is decremented

 - Punch a hole in the file/mapping at index previously faulted
   Reservation and any associated pages will be removed

 - Allocate a page to fill the hole
   No reservation entry, so reserve count unmodified
   Reservation entry added to map by alloc_huge_page

 - Error after allocation and before instantiating the page
   Reservation entry remains in map

 - Allocate a page to fill the hole
   Reservation entry exists, so decrement reservation count

This will cause a reservation count underflow as the reservation count
was decremented twice for the same index.

A user would observe a very large number for HugePages_Rsvd in
/proc/meminfo.  This would also likely cause subsequent allocations of
hugetlb pages to fail as it would 'appear' that all pages are reserved.

This sequence of operations is unlikely to happen, however they were
easily reproduced and observed using hacked up code as described in [1].

Address the issue by having the routine restore_reserve_on_error take
action on pages where HPageRestoreReserve is not set.  In this case, we
need to remove any reserve map entry created by alloc_huge_page.  A new
helper routine vma_del_reservation assists with this operation.

There are three callers of alloc_huge_page which do not currently call
restore_reserve_on error before freeing a page on error paths.  Add
those missing calls.

[1] https://lore.kernel.org/linux-mm/20210528005029.88088-1-almasrymina@google.com/

Link: https://lkml.kernel.org/r/20210607204510.22617-1-mike.kravetz@oracle.com
Fixes: 96b96a9 ("mm/hugetlb: fix huge page reservation leak in private mapping error paths"
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in
clear_inode:

  kernel BUG at fs/inode.c:519!
  Internal error: Oops - BUG: 0 [#1] SMP
  Modules linked in:
  Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7)
  CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95
  Hardware name: linux,dummy-virt (DT)
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : clear_inode+0x280/0x2a8
  lr : clear_inode+0x280/0x2a8
  Call trace:
    clear_inode+0x280/0x2a8
    ext4_clear_inode+0x38/0xe8
    ext4_free_inode+0x130/0xc68
    ext4_evict_inode+0xb20/0xcb8
    evict+0x1a8/0x3c0
    iput+0x344/0x460
    do_unlinkat+0x260/0x410
    __arm64_sys_unlinkat+0x6c/0xc0
    el0_svc_common+0xdc/0x3b0
    el0_svc_handler+0xf8/0x160
    el0_svc+0x10/0x218
  Kernel panic - not syncing: Fatal exception

A crash dump of this problem show that someone called __munlock_pagevec
to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap
-> munlock_vma_pages_range -> __munlock_pagevec.

As a result memory_failure will call identify_page_state without
wait_on_page_writeback.  And after truncate_error_page clear the mapping
of this page.  end_page_writeback won't call sb_clear_inode_writeback to
clear inode->i_wb_list.  That will trigger BUG_ON in clear_inode!

Fix it by checking PageWriteback too to help determine should we skip
wait_on_page_writeback.

Link: https://lkml.kernel.org/r/20210604084705.3729204-1-yangerkun@huawei.com
Fixes: 0bc1f8b ("hwpoison: fix the handling path of the victimized page frame that belong to non-LRU")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As mentioned in kernel commit 1d50e5d ("crash_core, vmcoreinfo:
Append 'MAX_PHYSMEM_BITS' to vmcoreinfo"), SECTION_SIZE_BITS in the
formula:

    #define SECTIONS_SHIFT    (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)

Besides SECTIONS_SHIFT, SECTION_SIZE_BITS is also used to calculate
PAGES_PER_SECTION in makedumpfile just like kernel.

Unfortunately, this arch-dependent macro SECTION_SIZE_BITS changes, e.g.
recently in kernel commit f0b13ee ("arm64/sparsemem: reduce
SECTION_SIZE_BITS").  But user space wants a stable interface to get
this info.  Such info is impossible to be deduced from a crashdump
vmcore.  Hence append SECTION_SIZE_BITS to vmcoreinfo.

Link: https://lkml.kernel.org/r/20210608103359.84907-1-kernelfans@gmail.com
Link: http://lists.infradead.org/pipermail/kexec/2021-June/022676.html
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Boris Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Anderson <anderson@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
aegl and others added 25 commits June 24, 2021 19:40
Patch series "mm,hwpoison: fix sending SIGBUS for Action Required MCE", v5.

I wrote this patchset to materialize what I think is the current
allowable solution mentioned by the previous discussion [1].  I simply
borrowed Tony's mutex patch and Aili's return code patch, then I queued
another one to find error virtual address in the best effort manner.  I
know that this is not a perfect solution, but should work for some
typical case.

[1]: https://lore.kernel.org/linux-mm/20210331192540.2141052f@alex-virtual-machine/

This patch (of 2):

There can be races when multiple CPUs consume poison from the same page.
The first into memory_failure() atomically sets the HWPoison page flag
and begins hunting for tasks that map this page.  Eventually it
invalidates those mappings and may send a SIGBUS to the affected tasks.

But while all that work is going on, other CPUs see a "success" return
code from memory_failure() and so they believe the error has been
handled and continue executing.

Fix by wrapping most of the internal parts of memory_failure() in a
mutex.

[akpm@linux-foundation.org: make mf_mutex local to memory_failure()]

Link: https://lkml.kernel.org/r/20210521030156.2612074-1-nao.horiguchi@gmail.com
Link: https://lkml.kernel.org/r/20210521030156.2612074-2-nao.horiguchi@gmail.com
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Aili Yao <yaoaili@kingsoft.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jue Wang <juew@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…en poisoned

When memory_failure() is called with MF_ACTION_REQUIRED on the page that
has already been hwpoisoned, memory_failure() could fail to send SIGBUS
to the affected process, which results in infinite loop of MCEs.

Currently memory_failure() returns 0 if it's called for already
hwpoisoned page, then the caller, kill_me_maybe(), could return without
sending SIGBUS to current process.  An action required MCE is raised
when the current process accesses to the broken memory, so no SIGBUS
means that the current process continues to run and access to the error
page again soon, so running into MCE loop.

This issue can arise for example in the following scenarios:

 - Two or more threads access to the poisoned page concurrently. If
   local MCE is enabled, MCE handler independently handles the MCE
   events. So there's a race among MCE events, and the second or latter
   threads fall into the situation in question.

 - If there was a precedent memory error event and memory_failure() for
   the event failed to unmap the error page for some reason, the
   subsequent memory access to the error page triggers the MCE loop
   situation.

To fix the issue, make memory_failure() return an error code when the
error page has already been hwpoisoned.  This allows memory error
handler to control how it sends signals to userspace.  And make sure
that any process touching a hwpoisoned page should get a SIGBUS even in
"already hwpoisoned" path of memory_failure() as is done in page fault
path.

Link: https://lkml.kernel.org/r/20210521030156.2612074-3-nao.horiguchi@gmail.com
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jue Wang <juew@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…recovers

Currently me_huge_page() temporary unlocks page to perform some actions
then locks it again later.  My testcase (which calls hard-offline on
some tail page in a hugetlb, then accesses the address of the hugetlb
range) showed that page allocation code detects this page lock on buddy
page and printed out "BUG: Bad page state" message.

check_new_page_bad() does not consider a page with __PG_HWPOISON as bad
page, so this flag works as kind of filter, but this filtering doesn't
work in this case because the "bad page" is not the actual hwpoisoned
page.  So stop locking page again.  Actions to be taken depend on the
page type of the error, so page unlocking should be done in ->action()
callbacks.  So let's make it assumed and change all existing callbacks
that way.

Link: https://lkml.kernel.org/r/20210609072029.74645-1-nao.horiguchi@gmail.com
Fixes: commit 78bb920 ("mm: hwpoison: dissolve in-use hugepage in unrecoverable memory error")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
… array

In the event that somebody would call this with an already fully
populated page_array, the last loop iteration would do an access beyond
the end of page_array.

It's of course extremely unlikely that would ever be done, but this
triggers my internal static analyzer.  Also, if it really is not
supposed to be invoked this way (i.e., with no NULL entries in
page_array), the nr_populated<nr_pages check could simply be removed
instead.

Link: https://lkml.kernel.org/r/20210507064504.1712559-1-linux@rasmusvillemoes.dk
Fixes: 0f87d9d ("mm/page_alloc: add an array-based interface to the bulk page allocator")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…ements

Dan Carpenter reported the following

  The patch 0f87d9d: "mm/page_alloc: add an array-based interface
  to the bulk page allocator" from Apr 29, 2021, leads to the following
  static checker warning:

        mm/page_alloc.c:5338 __alloc_pages_bulk()
        warn: potentially one past the end of array 'page_array[nr_populated]'

The problem can occur if an array is passed in that is fully populated.
That potentially ends up allocating a single page and storing it past
the end of the array.  This patch returns 0 if the array is fully
populated.

Link: https://lkml.kernel.org/r/20210618125102.GU30378@techsingularity.net
Fixes: 0f87d9d ("mm/page_alloc: add an array-based interface to the bulk page allocator")
Signed-off-by: Mel Gorman <mgorman@techsinguliarity.net>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix my name to use diacritics, since MAINTAINERS supports it.

Fix my e-mail address in MAINTAINERS' marvell10g PHY driver description,
I accidentally put my other e-mail address here.

Link: https://lkml.kernel.org/r/20210616113624.19351-1-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…tics

Some of my commits were sent with identities
  Marek Behun <marek.behun@nic.cz>
  Marek Behún <marek.behun@nic.cz>
while the correct one is
  Marek Behún <kabel@kernel.org>

Put this into mailmap so that git shortlog prints all my commits under
one identity.

Link: https://lkml.kernel.org/r/20210616113624.19351-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both of these drivers use ioport_map(), so they need to
depend on HAS_IOPORT_MAP. Otherwise, they cannot be built
even with COMPILE_TEST on architectures without an ioport
implementation, such as ARCH=um.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
…el/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Two small changes have been cherry-picked as a last material for 5.13:
  a coverage after UMN revert action and a stale MAINTAINERS entry fix"

* tag 'sound-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  MAINTAINERS: remove Timur Tabi from Freescale SOC sound drivers
  ASoC: rt5645: Avoid upgrading static warnings to errors
…x/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - fix wake-up interrupt support on gpio-mxc

 - zero the padding bytes in a structure passed to user-space in the
   GPIO character device

 - require HAS_IOPORT_MAP in two drivers that need it to fix a Kbuild
   issue

* tag 'gpio-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: AMD8111 and TQMX86 require HAS_IOPORT_MAP
  gpiolib: cdev: zero padding during conversion to gpioline_info_changed
  gpio: mxc: Fix disabled interrupt wake-up support
…x/kernel/git/dhowells/linux-fs

Pull netfs fixes from David Howells:
 "This contains patches to fix netfs_write_begin() and afs_write_end()
  in the following ways:

  (1) In netfs_write_begin(), extract the decision about whether to skip
      a page out to its own helper and have that clear around the region
      to be written, but not clear that region. This requires the
      filesystem to patch it up afterwards if the hole doesn't get
      completely filled.

  (2) Use offset_in_thp() in (1) rather than manually calculating the
      offset into the page.

  (3) Due to (1), afs_write_end() now needs to handle short data write
      into the page by generic_perform_write(). I've adopted an
      analogous approach to ceph of just returning 0 in this case and
      letting the caller go round again.

  It also adds a note that (in the future) the len parameter may extend
  beyond the page allocated. This is because the page allocation is
  deferred to write_begin() and that gets to decide what size of THP to
  allocate."

Jeff Layton points out:
 "The netfs fix in particular fixes a data corruption bug in cephfs"

* tag 'netfs-fixes-20210621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: fix test for whether we can skip read when writing beyond EOF
  afs: Fix afs_write_end() to handle short writes
Pull ceph fixes from Ilya Dryomov:
 "Two regression fixes from the merge window: one in the auth code
  affecting old clusters and one in the filesystem for proper
  propagation of MDS request errors.

  Also included a locking fix for async creates, marked for stable"

* tag 'ceph-for-5.13-rc8' of https://github.com/ceph/ceph-client:
  libceph: set global_id as soon as we get an auth ticket
  libceph: don't pass result into ac->ops->handle_reply()
  ceph: fix error handling in ceph_atomic_open and ceph_lookup
  ceph: must hold snap_rwsem when filling inode for async create
…x/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
 "Two more urgent FPU fixes:

   - prevent unprivileged userspace from reinitializing supervisor
     states

   - prepare init_fpstate, which is the buffer used when initializing
     FPU state, properly in case the skip-writing-state-components
     XSAVE* variants are used"

* tag 'x86_urgent_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Make init_fpstate correct with optimized XSAVE
  x86/fpu: Preserve supervisor states in sanitize_restored_user_xstate()
…/kvm

Pull kvm fixes from Paolo Bonzini:
 "A selftests fix for ARM, and the fix for page reference count
  underflow. This is a very small fix that was provided by Nick Piggin
  and tested by myself"

* tag 'for-linus-urgent' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: do not allow mapping valid but non-reference-counted pages
  KVM: selftests: Fix mapping length truncation in m{,un}map()
…inux/kernel/git/xen/tip

Pull xen fix from Juergen Gross:
 "A fix for a regression introduced in 5.12: when migrating an irq
  related to a Xen user event to another cpu, a race might result
  in a WARN() triggering"

* tag 'for-linus-5.13b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: reset active flag for lateeoi events later
…rnel/git/rafael/linux-pm

Pull device properties framework fix from Rafael Wysocki:
 "Fix a NULL pointer dereference introduced by a recent commit and
  occurring when device_remove_software_node() is used with a device
  that has never been registered (Heikki Krogerus)"

* tag 'devprop-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Handle software node injection to an existing device properly
…kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Three more driver bugfixes and an annotation fix for the core"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: robotfuzz-osif: fix control-request directions
  i2c: dev: Add __user annotation
  i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access
This ioctl request reads from uffdio_continue structure written by
userspace which justifies _IOC_WRITE flag.  It also writes back to that
structure which justifies _IOC_READ flag.

See NOTEs in include/uapi/asm-generic/ioctl.h for more information.

Fixes: f619147 ("userfaultfd: add UFFDIO_CONTINUE ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc fixes from Andrew Morton:
 "24 patches, based on 4a09d38.

  Subsystems affected by this patch series: mm (thp, vmalloc, hugetlb,
  memory-failure, and pagealloc), nilfs2, kthread, MAINTAINERS, and
  mailmap"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
  mailmap: add Marek's other e-mail address and identity without diacritics
  MAINTAINERS: fix Marek's identity again
  mm/page_alloc: do bulk array bounds check after checking populated elements
  mm/page_alloc: __alloc_pages_bulk(): do bounds check before accessing array
  mm/hwpoison: do not lock page again when me_huge_page() successfully recovers
  mm,hwpoison: return -EHWPOISON to denote that the page has already been poisoned
  mm/memory-failure: use a mutex to avoid memory_failure() races
  mm, futex: fix shared futex pgoff on shmem huge page
  kthread: prevent deadlock when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
  kthread_worker: split code for canceling the delayed work timer
  mm/vmalloc: unbreak kasan vmalloc support
  KVM: s390: prepare for hugepage vmalloc
  mm/vmalloc: add vmalloc_no_huge
  nilfs2: fix memory leak in nilfs_sysfs_delete_device_group
  mm/thp: another PVMW_SYNC fix in page_vma_mapped_walk()
  mm/thp: fix page_vma_mapped_walk() if THP mapped by ptes
  mm: page_vma_mapped_walk(): get vma_address_end() earlier
  mm: page_vma_mapped_walk(): use goto instead of while (1)
  mm: page_vma_mapped_walk(): add a level of indentation
  mm: page_vma_mapped_walk(): crossing page table boundary
  ...
…it/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Two small fixes, both in upper layer drivers (scsi disk and cdrom).

  The sd one is fixing a commit changing revalidation that came from the
  block tree a while ago (5.10) and the sr one adds handling of a
  condition we didn't previously handle for manually removed media"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Call sd_revalidate_disk() for ioctl(BLKRRPART)
  scsi: sr: Return appropriate error code when disk is ejected
…nel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Two last-minute fixes:

   - Put an fwnode in the errorpath in the SGPIO driver

   - Fix the number of GPIO lines per bank in the STM32 driver"

* tag 'pinctrl-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: fix the reported number of GPIO lines per bank
  pinctrl: microchip-sgpio: Put fwnode in error case during ->probe()
…git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix a couple of late pt_regs flags handling findings of conversion to
   generic entry.

 - Fix potential register clobbering in stack switch helper.

 - Fix thread/group masks for offline cpus.

 - Fix cleanup of mdev resources when remove callback is invoked in
   vfio-ap code.

* tag 's390-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/stack: fix possible register corruption with stack switch helper
  s390/topology: clear thread/group maps for offline cpus
  s390/vfio-ap: clean up mdev resources when remove callback invoked
  s390: clear pt_regs::flags on irq entry
  s390: fix system call restart with multiple signals
This reverts commits 4bad58e (and
399f8dd, which tried to fix it).

I do not believe these are correct, and I'm about to release 5.13, so am
reverting them out of an abundance of caution.

The locking is odd, and appears broken.

On the allocation side (in __sigqueue_alloc()), the locking is somewhat
straightforward: it depends on sighand->siglock.  Since one caller
doesn't hold that lock, it further then tests 'sigqueue_flags' to avoid
the case with no locks held.

On the freeing side (in sigqueue_cache_or_free()), there is no locking
at all, and the logic instead depends on 'current' being a single
thread, and not able to race with itself.

To make things more exciting, there's also the data race between freeing
a signal and allocating one, which is handled by using WRITE_ONCE() and
READ_ONCE(), and being mutually exclusive wrt the initial state (ie
freeing will only free if the old state was NULL, while allocating will
obviously only use the value if it was non-NULL, so only one or the
other will actually act on the value).

However, while the free->alloc paths do seem mutually exclusive thanks
to just the data value dependency, it's not clear what the memory
ordering constraints are on it.  Could writes from the previous
allocation possibly be delayed and seen by the new allocation later,
causing logical inconsistencies?

So it's all very exciting and unusual.

And in particular, it seems that the freeing side is incorrect in
depending on "current" being single-threaded.  Yes, 'current' is a
single thread, but in the presense of asynchronous events even a single
thread can have data races.

And such asynchronous events can and do happen, with interrupts causing
signals to be flushed and thus free'd (for example - sending a
SIGCONT/SIGSTOP can happen from interrupt context, and can flush
previously queued process control signals).

So regardless of all the other questions about the memory ordering and
locking for this new cached allocation, the sigqueue_cache_or_free()
assumptions seem to be fundamentally incorrect.

It may be that people will show me the errors of my ways, and tell me
why this is all safe after all.  We can reinstate it if so.  But my
current belief is that the WRITE_ONCE() that sets the cached entry needs
to be a smp_store_release(), and the READ_ONCE() that finds a cached
entry needs to be a smp_load_acquire() to handle memory ordering
correctly.

And the sequence in sigqueue_cache_or_free() would need to either use a
lock or at least be interrupt-safe some way (perhaps by using something
like the percpu 'cmpxchg': it doesn't need to be SMP-safe, but like the
percpu operations it needs to be interrupt-safe).

Fixes: 399f8dd ("signal: Prevent sigqueue caching after task got released")
Fixes: 4bad58e ("signal: Allow tasks to cache one sigqueue struct")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linux 5.13

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
@ksquirrel

This comment has been minimized.

@ojeda ojeda merged commit 4bfaa80 into Rust-for-Linux:rust Jun 29, 2021
@ojeda ojeda deleted the sync branch June 29, 2021 12:40
ojeda pushed a commit that referenced this pull request Jul 29, 2021
Subprograms are calling map_poke_track(), but on program release there is no
hook to call map_poke_untrack(). However, on program release, the aux memory
(and poke descriptor table) is freed even though we still have a reference to
it in the element list of the map aux data. When we run map_poke_run(), we then
end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run():

  [...]
  [  402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e
  [  402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337
  [  402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G          I       5.12.0+ #399
  [  402.824715] Call Trace:
  [  402.824719]  dump_stack+0x93/0xc2
  [  402.824727]  print_address_description.constprop.0+0x1a/0x140
  [  402.824736]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824740]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824744]  kasan_report.cold+0x7c/0xd8
  [  402.824752]  ? prog_array_map_poke_run+0xc2/0x34e
  [  402.824757]  prog_array_map_poke_run+0xc2/0x34e
  [  402.824765]  bpf_fd_array_map_update_elem+0x124/0x1a0
  [...]

The elements concerned are walked as follows:

    for (i = 0; i < elem->aux->size_poke_tab; i++) {
           poke = &elem->aux->poke_tab[i];
    [...]

The access to size_poke_tab is a 4 byte read, verified by checking offsets
in the KASAN dump:

  [  402.825004] The buggy address belongs to the object at ffff8881905a7800
                 which belongs to the cache kmalloc-1k of size 1024
  [  402.825008] The buggy address is located 320 bytes inside of
                 1024-byte region [ffff8881905a7800, ffff8881905a7c00)

The pahole output of bpf_prog_aux:

  struct bpf_prog_aux {
    [...]
    /* --- cacheline 5 boundary (320 bytes) --- */
    u32                        size_poke_tab;        /*   320     4 */
    [...]

In general, subprograms do not necessarily manage their own data structures.
For example, BTF func_info and linfo are just pointers to the main program
structure. This allows reference counting and cleanup to be done on the latter
which simplifies their management a bit. The aux->poke_tab struct, however,
did not follow this logic. The initial proposed fix for this use-after-free
bug further embedded poke data tracking into the subprogram with proper
reference counting. However, Daniel and Alexei questioned why we were treating
these objects special; I agree, its unnecessary. The fix here removes the per
subprogram poke table allocation and map tracking and instead simply points
the aux->poke_tab pointer at the main programs poke table. This way, map
tracking is simplified to the main program and we do not need to manage them
per subprogram.

This also means, bpf_prog_free_deferred(), which unwinds the program reference
counting and kfrees objects, needs to ensure that we don't try to double free
the poke_tab when free'ing the subprog structures. This is easily solved by
NULL'ing the poke_tab pointer. The second detail is to ensure that per
subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do
this, we add a pointer in the poke structure to point at the subprogram value
so JITs can easily check while walking the poke_tab structure if the current
entry belongs to the current program. The aux pointer is stable and therefore
suitable for such comparison. On the jit_subprogs() error path, we omit
cleaning up the poke->aux field because these are only ever referenced from
the JIT side, but on error we will never make it to the JIT, so its fine to
leave them dangling. Removing these pointers would complicate the error path
for no reason. However, we do need to untrack all poke descriptors from the
main program as otherwise they could race with the freeing of JIT memory from
the subprograms. Lastly, a748c69 ("bpf: propagate poke descriptors to
subprograms") had an off-by-one on the subprogram instruction index range
check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'.
However, subprog_end is the next subprogram's start instruction.

Fixes: a748c69 ("bpf: propagate poke descriptors to subprograms")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-2-john.fastabend@gmail.com
ojeda pushed a commit that referenced this pull request Aug 8, 2025
Use BPF_TRAMP_F_INDIRECT flag to detect struct ops and emit proper
prologue and epilogue for this case.

With this patch, all of the struct_ops related testcases (except
struct_ops_multi_pages) passed on LoongArch.

The testcase struct_ops_multi_pages failed is because the actual
image_pages_cnt is 40 which is bigger than MAX_TRAMP_IMAGE_PAGES.

Before:

  $ sudo ./test_progs -t struct_ops -d struct_ops_multi_pages
  ...
  WATCHDOG: test case struct_ops_module/struct_ops_load executes for 10 seconds...

After:

  $ sudo ./test_progs -t struct_ops -d struct_ops_multi_pages
  ...
  #15      bad_struct_ops:OK
  ...
  #399     struct_ops_autocreate:OK
  ...
  #400     struct_ops_kptr_return:OK
  ...
  #401     struct_ops_maybe_null:OK
  ...
  #402     struct_ops_module:OK
  ...
  #404     struct_ops_no_cfi:OK
  ...
  #405     struct_ops_private_stack:SKIP
  ...
  #406     struct_ops_refcounted:OK
  Summary: 8/25 PASSED, 3 SKIPPED, 0 FAILED

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Development

Successfully merging this pull request may close these issues.