This code example demonstrates how to perform gesture classification based on motion sensor (accelerometer and gyroscope) data. The code example comes with a pre-trained model that classifies the following gestures: circle, square, and side-to-side.

This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

This repository is deprecated. Use the ModusToolbox™ example available here - https://github.com/Infineon/mtb-example-usb-device-audio-freertos. This example demonstrates how to use PSoC 6 MCU to implement a USB Audio Device and HID Consumer Control that connects to the PC via the USB interface. The example also uses FreeRTOS.

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

This community code example (CCE) demonstrates the implementation of LTE CAT M1 connectivity to PSoC6 via Point-to-Point Protocol (PPP). This CCE demonstrates the steps to add LTE connectivity to any existing Wi-Fi based code example. mtb-example-anycloud-mqtt-client is taken as a reference here. GM01Q_Sequans Module is used for providing LTE co…

mtb-example-usb-device-cdc-echo

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-mouse. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a 3-button mouse.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This code example demonstrates the implementation of a simple FreeRTOS task, which toggles an LED periodically using PSoC® 64 MCU.

This example demonstrates displaying 2D graphics on a TFT display using the emWin graphics library and the AppWizard GUI design tool in FreeRTOS.

This code example demonstrates CapSense® Component’s custom scanning through callback functions that allow altering the sensor parameters during run-time or synchronizing the CapSense scan with non-CapSense operations.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-generic. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a Generic HID device.

This example demonstrates interfacing with an external NOR flash memory in Quad-SPI mode using the Serial Memory Interface (SMIF) block in PSoC® 6 MCU. This example uses the Serial Flash Discoverable Parameters (SFDP) standard to auto-discover the flash parameters and the commands for read, program, and erase operations.

This code example demonstrates implementing a secure TCP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This repository is deprecated. Use the ModusToolbox™ example available here - https://github.com/Infineon/mtb-example-usb-device-audio-recorder-freertos. This example demonstrates the use of PSoC 6 MCU to implement an audio recorder using the USB Audio Device Class.

This code example demonstrates the low-power operation of PSoC 6 MCU and CYW43xxx connectivity devices using the AnyCloud Low Power Assistant (LPA) middleware library.

This empty application provides a template for creating applications using PSoC 6 devices.

This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.